top of page

WillCo Digital Drilling Intelligence - Edition #14: Robotic Drilling Automation. Aug 24-30, 2026

Writer: William B. Contreras
William B. Contreras
Aug 26
18 min read

🎯 ExxonMobil targets scaling robotic drilling toward half its Permian fleet by 2028. Its first automated rig drilled 2 miles horizontally in just over 6 days, the third-fastest in company history.

⚠️ If your Permian curve is slower than that for a 2-mile lateral, that is the gap your 2027 rig contract needs a day-rate step-down clause for.

📌 If you are signing a 2027 rig or intervention contract in the next two quarters, this edition is your pre-negotiation brief.

📋 This Edition at a Glance

  • 🤖 ExxonMobil: 2 of 30-plus Permian rigs run automated today, with a stated target of roughly half the fleet by 2028. Its first automated rig drilled 2 miles horizontally in just over 6 days, the third-fastest in company history. The reporting does not establish how autonomous the system actually is. Full Top Story below, with the autonomy and connection-consistency questions to put to your contractor, plus a day-rate step-down clause to adapt for your 2027 contracts.

  • 🌋 Fervo: Sawtooth 7 drilled 19,448 ft MD in 21 days (Fervo-reported), about 34% more feet per day than Fervo's Phase I wells. That gain is WillCo's calculation from Fervo's own published well-design table, not a company claim. Benchmark any geothermal or hard-rock day-count bid against 21 days / 19,448 ft before you sign.

  • ⚡ SLB's ExaCT re-entered laterals roughly 30 to 40 times faster than conventional hydraulics. The reason is architectural, not incremental - it replaces pressure-dependent hydraulic actuation with direct electrical control. On one six-lateral well SLB reported about 175 intervention-hours saved, more than seven days of rig time. Vendor-reported, single well.


🗓️ Intake note: the industry, papers, and energy-transition beats run on rolling windows wider than the masthead week, so several items below carry earlier publication dates. Each item is dated where it appears.

🧭 Why This Edition Matters

💡 WillCo's read: the companies cutting cost fastest this week treat automation as infrastructure, not theater.


🛢️ Top Story

🤖 ExxonMobil Targets Scaling Robotic Drilling Automation Toward Half Its Permian Fleet by 2028

Robotic drilling automation on a Permian rig floor at dusk, with racked pipe and crew positioned away from the pipe-handling zone
Illustrative rig floor at dusk. On ExxonMobil's automated Permian rigs, robotic equipment moves pipe joints of roughly 2,000 pounds with no roughneck in this zone (Reuters, Aug 24, 2026).

ExxonMobil has set a target of putting robots on roughly half its Permian rig floors by 2028 - 2 of its 30-plus rigs run automated today - and its first automated rig already drilled the third-fastest time in company history. For operators, the relevant question is what that stated ramp means for 2027 rig contracts.

ExxonMobil runs more than 30 rigs in the Permian Basin. Two of those rigs now run robotic automated equipment capable of moving steel pipe joints weighing roughly 2,000 pounds without a roughneck on the rig floor. The company has stated it plans to automate approximately a quarter of the fleet within the next year, with a target of automating close to half the fleet by 2028.

The first automated rig, supplied by Helmerich and Payne, drilled 2 miles horizontally in just over 6 days, a performance Exxon has described as the third-fastest time in its history.

Source: Reuters (Sheila Dang), published Aug 24, 2026.



The safety rationale is explicit and quantified in Exxon's own framing: about a third of significant injuries occur on the rig floor. Automating pipe-handling physically relocates personnel from the hazard zone to remote or protected operating positions. In WillCo's read, this is not an incremental safety improvement; it is a structural change in crew positioning that also, as a secondary benefit, removes human fatigue variability from the pipe-handling cycle. The combination of safety driver and performance outcome is, in our analysis, what gives this program durability that pure efficiency plays lack when oil prices soften.

One thing worth saying plainly, because the coverage keeps implying otherwise: automated pipe handling is not a new strategy. Mechanized and automated tubular handling - iron roughnecks, pipe-racking systems, remote-operated tongs - has been standard equipment on offshore and high-spec land rigs for years, and the category is still being iterated on rather than invented: this same edition carries Canrig's Titan wrench as a current product development, not a first-of-kind. The technology is not the story. What is new is an operator with more than 30 rigs attaching a calendar year to a fleet percentage. Exxon is converting a mature equipment category into a fleet standard, and that is a procurement and contracting event more than a technology breakthrough. Read it that way and you plan for it correctly.

The second question the reporting does not answer: how autonomous is it, actually? What has been established is that robotic equipment handles joints weighing roughly 2,000 pounds and that personnel come off the rig floor. That is a statement about where people are standing, not about who is making decisions. Taking a hand out of the red zone and taking a human out of the loop are different achievements, and only the first is on the record. No source in this edition's archive states whether the system completes a full connection sequence unattended, whether a driller initiates and supervises each connection from the chair, or whether a hand still steps in on exceptions such as misaligned stands, damaged threads, or a stand that does not stab clean. That gap matters commercially: a supervised system and an unattended one carry different crew models, different training costs, and different day-rate arguments. Treat any "autonomous rig" framing as unconfirmed until ExxonMobil or Helmerich and Payne publish the level of human involvement. Ask the contractor directly, in writing: what share of connections complete with no human input, and what triggers an intervention?

Third, and this is where a serious technical evaluation should focus: the right test for rig-floor automation is consistency, not speed. A third-fastest-in-company-history well is a peak-performance result, and peak performance is the weakest evidence automation can offer, because a strong crew on a good day already produces it. What a crew cannot reliably produce is the same connection time on hour one and hour twenty, on days and on nights, on the first well of a pad and the fourth. That repeatability is the machine's real advantage, and it is the one that compounds. Connection-time variance does not stay inside the connection: every unplanned pause in the cycle is also a pause in circulating, hole conditioning, and steady-state parameter control, so a scattered connection band quietly degrades the whole drilling sequence around it.

So the number to ask for is not the average connection time. It is the distribution. An automated system that posts a fast average but scatters across a wide band is not delivering what it was sold on; it is delivering a fast average with a human still absorbing the exceptions. A system that holds a tight band, even at a slightly slower median, is the one that changes well planning, because it makes section duration predictable enough to plan and price against.


What separates this from a single-rig demonstration is the fleet sequencing commitment. Exxon is not saying "we are evaluating" - it is stating automation percentages with year-attached targets. For operators watching from the sidelines, the relevant question is not whether robotic rig-floor automation works; one Helmerich and Payne rig in the Permian just answered that. The open question is timing - how long before the performance gap between automated and conventional fleets becomes visible in well-cost-per-foot. No operator has yet published an automated-versus-conventional well-cost-per-foot benchmark, so you would be pricing a gap nobody has quantified - which is exactly why the step-down clause belongs in the contract now, not after the number goes public. WillCo's read: lock conventional rig terms now with automation-performance step-downs written in, or you inherit the price gap - automated-rig premiums against conventional-rig discounts - when the fleet gap becomes visible in 2028.



📰 Key Developments This Week


⚡ SLB ExaCT: Electrical Control Replaces Hydraulic Actuation in Coiled-Tubing Interventions

A 30x to 40x cut in lateral re-entry time: about 12 minutes, against the 6-8 hours conventional hydraulic systems take. That is the headline figure from SLB's newly launched ExaCT, an electrically actuated coiled-tubing intervention system. On one six-lateral well, SLB also reported 175 hours of intervention-time reduction and reservoir contact stimulated of more than 21,000 feet. Twelve minutes on its own reads like a small number, so it is worth being explicit about why it is the figure to watch. Entry time is a cost you pay once per lateral, so on this six-lateral well conventional hydraulics would spend somewhere around 36 to 48 hours simply getting into the laterals before any productive work starts (WillCo arithmetic on SLB's own figures). That is the bottleneck ExaCT attacks, and the mechanism is the part that should hold: hydraulic tools actuate by pressure cycling, which is slow, indirect, and less certain the deeper and more complex the well gets. ExaCT replaces that with real-time electrical communication, power delivery, and downhole telemetry, so actuation becomes a command rather than a pressure sequence. The caveat matters as much as the number: these are vendor-reported single-well figures, not fleet averages. But the shift from hydraulic to electrical downhole control is an architecture change, and architecture changes tend to survive where single-well performance claims do not.Your move: hold the 12-minute figure out of your AFE until multi-well data lands, but if you have multilateral re-entry on your 2027 program, the number to ask SLB for is entry time across a case library, not the best well.


📑 SPE 217754: A Peer-Reviewed Taxonomy for Autonomous Drilling System Classification

Published in SPE Journal and summarized in JPT (Jul 29, 2026), SPE 217754 establishes a ten-trait framework for classifying autonomous drilling systems: environment complexity, problem complexity, mission, risk management, dynamic planning, situational awareness, decision-making, execution, learning capability, and agent interaction. This is a conceptual taxonomy with no performance benchmarks, but its value is operational: operators now have a published peer-reviewed vocabulary for specifying automation capability levels in rig contracts and vendor evaluations rather than accepting marketing language at face value.Your move: adopt the ten traits as a scoring rubric for your next automation RFP, so vendor claims map to engineering criteria instead of marketing language.


🌏 Pertamina Hulu Energi: Digital Adoption at NOC Scale Outside North America

Roughly 1,000 wells per year across about 50 fields, supported by roughly 70 drilling rigs and 150 well-intervention rigs. That is the target Pertamina Hulu Energi stated at the SPE/IADC Asia Pacific Drilling Technology Conference in Bali, as reported by Drilling Contractor on Aug 20, 2026. Digital and automation technologies were named as key enablers, with Pertamina explicitly stressing demonstrated value and user acceptance as prerequisites before scaling new technology. This is not an aspiration statement from a small operator - it is one of the largest drilling programs in Southeast Asia (WillCo analysis) describing digital integration as a scaling mechanism.Your move: if you sell drilling technology into Asia-Pacific, design your field-trial program around Pertamina's stated demonstrated-value and user-acceptance gate now, not after the RFP.

🧪 NPTLabs: Drilling-Fluid Data Validation as Engineering Infrastructure

In an Oilfield Technology special report (Aug 17, 2026), NPTLabs framed unvalidated drilling-fluid data - its core fluid properties - as the primary degradation layer for every physics-based model that depends on it. The mechanism is simple. Sensor drift and outlier contamination at the fluid-data layer propagate silently into every model sitting above it. No quantified field results were provided; this is vendor-driven thought leadership. The technical claim, however, is grounded: garbage-in garbage-out applies with particular force when the garbage is invisible to the engineer running the model.Your move: put a validation checkpoint at the fluid-data layer before you trust any model that consumes it.

⚙️ Weekly Operational Insights

19,448 ft MD in 21 days. That is the most concrete field-level drilling performance carried in this edition, reported in Fervo Energy's Q2 2026 results (released Aug 12, 2026). The Sawtooth 7 geometry - a 7,500 ft lateral to 19,448 ft MD in 21 days - was first reported Jul 8, 2026 and referenced as a Q2 milestone in the Aug 12 results; the well is deeper, hotter, and longer than Fervo's earlier Cape Station wells (Fervo 2.0 design), against which Fervo benchmarks its learning curve. These are company-reported figures (Fervo / GlobeNewswire) and are not independently verified.



Fervo also raised its long-term development target to 1,100 MW by 2030 - a 100 MW increase from prior guidance - and reaffirmed Phase II all-in cost guidance of $5.5 million per MW with a long-term target of $3 million per MW. In WillCo's read, the drilling gains are the primary mechanism compressing that per-MW trajectory. For operators tracking geothermal well construction, Sawtooth 7 is the clearest published evidence that a structured learning-curve program in hard-rock directional drilling compounds efficiency in weeks, not quarters.


📐 Case Highlights

💡 So what for you: both cases turn control-system and while-drilling data into a failure warning before the failure is visible - but only if you have baselined the data, which most operators have not.

🛡️ IPT Global: Predictive Detection of MPD Annular Element Degradation

A failure signature reportedly visible in the data days before the annular element failed. That is the finding from IPT Global's post-event analysis of a managed-pressure-drilling operation in which a slimline annular element failed in service: its MPD control-system time-series diagnostics isolated a degradation signature detectable days before visible failure or operational indication - a repeatable early-warning framework linking digital control-system diagnostics to NPT and well-control risk. The engineering logic is sound: annular element compliance changes before it fails, and that change should be visible in the control-system time series if a baseline is established. Caveat: vendor-reported and single-well, no independent verification available. Source: IPT Global case study (publisher gives no date).Your move: if you run slimline MPD, pull your control-system time series and baseline it now - Recommendation 2 below shows how.

🪨 XRF-FI.ai and WellSoft: Formation Damage Prediction While Drilling

Reported in Drilling Contractor (Aug 21, 2026), XRF-FI.ai and WellSoft are linking real-time drilling-fluid measurements to formation-damage modeling. XRF-FI.ai measures fluid composition using X-ray fluorescence, particle-size analysis, and rheology, tracking solids content, particle-size distribution, and barite concentration; combining that with WellSoft's wellbore damage simulator is intended to let drilling teams identify conditions that could lead to fluid invasion or formation impairment while the well is still being drilled, rather than after it has been completed and underperforms. The technical significance is the timing: formation damage that is identified while the bit is still in the wellbore is actionable; damage identified at production testing is a write-off. Caveats: no quantified field results were provided, and the source states no computational method, so treat any AI or ML characterization as unconfirmed. Single trade-report, no independent verification.Your move: if formation-damage risk is on your program, ask both vendors what the prediction is actually built on and for any blind-well results before you weight it.

📊 Data-Driven Trends

💡 So what for you (WillCo's read): three patterns are converging across this edition's verified intelligence, and each one reprices a decision you make in the next two quarters.

  • Automation is splitting into two tracks. Software automation (RTOC, analytics, model-driven advisory) and physical automation (robotic pipe-handling, electrically actuated tools) are diverging. ExxonMobil's Permian program is the clearest example of the physical track moving from pilot toward fleet-scale deployment (2 of 30-plus rigs today, target roughly half by 2028).

  • Prediction-before-failure is becoming the default framing. IPT Global on annular elements, XRF-FI.ai and WellSoft on formation damage, and the broader predictive-versus-reactive contrast WillCo flagged in the Aug 24 synthesis all point the same direction. Note that neither vendor has published the method behind the prediction, which is the question to put to them.

  • NOC-scale digital adoption outside North America is accelerating. Pertamina's 1,000-well-per-year target with digital as an explicit enabler is a demand signal OFS companies serving Asia-Pacific cannot treat as a secondary market.

The consistent thread is that operators generating hard performance numbers - Fervo's 21-day, 19,448 ft well and ExxonMobil's just-over-6-day horizontal - are doing so through structured, repeatable programs, not one-off technology demonstrations. The learning curve is the strategy, and digital infrastructure is what makes the learning curve measurable and reproducible.

📡 Technology on WillCo's Radar

🧠 Physics-AI Transient Wellbore Digital Twins

Drillers.ai presented a physics-AI digital twin at the IADC ART Spark Tank (event Jul 28, 2026, reported Drilling Contractor Aug 14, 2026) covering the full hole-section sequence from integrity-test interpretation through cementing as a unified simulation environment. The concept is technically ambitious: a transient wellbore simulator that spans operations rather than treating each phase as a separate model domain. At this stage it is early-stage, single-source, and carries no published field validation data.

The milestone that would make this worth a serious operator evaluation: a documented, independently verified comparison between twin predictions and actual wellbore measurements across at least two full hole sections on different well geometries. Until that data exists, this remains a framework to monitor, not a procurement decision.


🔍 WillCo Perspective: What the Engineering Says

Automating the pipe-handling cycle is really automating the boundary condition for continuous drilling optimization. The ExxonMobil story is being covered as a safety and labor story - accurate but incomplete. When a human crew handles pipe, the drilling system is paused and reset at each connection. When a robotic system handles pipe with consistent speed and positioning, the connection becomes a predictable, repeatable data point rather than a variable that contaminates your drilling-parameter trends - which is what enables tighter ROP optimization and more reliable NPT attribution. The performance number - third-fastest time in Exxon history on the first automated rig - is, in WillCo's read, likely a downstream consequence of that consistency, not just a demonstration of robotic speed.

A robotic rig floor feeding an unvalidated sensor stack into an uncalibrated model produces clean garbage instead of noisy garbage. The assumption that the automation hardware is the hard part is wrong. The hard part is the engineering workflow that uses the consistent data the automated system generates. The NPTLabs argument about fluid-data validation applies directly: before you trust the optimization outputs from an automated rig, verify that the input layer - sensor calibration, data transmission, model parameterization - is actually tighter than what you had before. In practice it is frequently looser than the crew assumes, and the two gaps WillCo sees recur most are miscalibrated flowline sensors and untracked model-parameter drift.

The SPE 217754 taxonomy paper is the tool I would put in the hands of every operator engineering team before their next rig-contract negotiation involving automation claims. Ten traits, peer-reviewed, no vendor branding. Use it to ask vendors exactly where their system sits on each axis. The answers will be more informative than the sales deck.


✅ Practical Recommendations

🛠️ Recommendation 1 - Audit Your Drilling-Fluid Sensor Stack Before Trusting Downstream Models

Pull your real-time fluid-property feeds - the core mud properties your models consume - and run a gap analysis against your downstream physics-based model inputs before the next hole section spud. As NPTLabs documented (Oilfield Technology, Aug 17, 2026), unvalidated fluid data is the input-layer failure that propagates silently through every physics-based model above it. Establish a sensor-validation checkpoint at the flowline and pit level; your model outputs will reflect actual wellbore conditions rather than instrument drift. Cost of inaction: optimization decisions made on drifted inputs look confident and are quietly wrong.

🛠️ Recommendation 2 - Map Your MPD Control-System Data for Annular-Element Degradation Signatures

If you are running managed-pressure drilling with a slimline annular preventer, extract the MPD control-system time-series diagnostics and define a baseline degradation curve now, before your next element change-out. IPT Global's case demonstrates that failure signatures exist in the data days before visible failure. Building that baseline costs a data engineer a few hours; missing the signature costs a lost hole section or worse.

🛠️ Recommendation 3 - Apply SPE 217754's Ten-Trait Framework to Your Next Automation Vendor RFP

Before issuing or responding to any RFP involving automated drilling capabilities, score every vendor's system against the ten classification traits in SPE 217754 (SPE Journal, Jul 29, 2026): environment complexity, problem complexity, mission, risk management, dynamic planning, situational awareness, decision-making, execution, learning capability, and agent interaction. This converts vendor marketing language into a structured engineering assessment and gives your procurement team a defensible technical basis for selection. Cost of inaction: you buy an automation capability level you cannot specify and cannot audit.

🛠️ Recommendation 4 - Establish Your Automated Rig Data Infrastructure Before the Hardware Arrives

If robotic rig-floor equipment is in your capital plan for 2027, the data architecture work needs to start now. Define your sensor validation standards, your connection-event data schema, and your model calibration protocols before the first automated stand is picked. A robotic system that feeds an unvalidated input layer produces the same bad model outputs as a conventional rig - just faster and more consistently. The infrastructure is the leverage point, not the hardware. Cost of inaction: the hardware arrives, the data architecture is not ready, and you pay premium rig rates to generate data you cannot trust.

♟️ Competitive Intelligence

💡 So what for you: here is who to press, and on exactly which number, before your 2027 contracts lock in.

Helmerich and Payne delivered the first ExxonMobil automated Permian rig - the one behind the Top Story benchmark above. This is a commercial reference that will be a standard fixture in H&P automated rig proposals going forward. Operators evaluating rig contractors for 2027 programs need to understand exactly which automation stack was on that rig, what the H&P-Exxon data-sharing arrangement looks like, and whether the performance is reproducible across the fleet or specific to a single configured unit.

SLB launched ExaCT (Aug 24, 2026); the single-well figures are covered in Key Developments above. The competitive point: the shift from hydraulic to electrical downhole actuation in coiled-tubing tools is a platform-level architectural change, not a product update. Press SLB for a multi-well case library before you let those numbers into a 2027 budget - if they hold, the economics of multilateral re-entry and stimulation campaigns move materially.


Pertamina Hulu Energi named digital and automation as explicit enablers for a 1,000-well-per-year drilling target at the SPE/IADC Asia Pacific Drilling Technology Conference in Bali, as reported by Drilling Contractor on Aug 20, 2026. For OFS companies - including the majors - this is a signal that Southeast Asia is no longer a secondary market for drilling technology deployment. Pertamina's stated requirement for demonstrated value and user acceptance before scaling is also a procurement posture that smaller technology vendors need to design their field-trial programs around.

drillers.ai (IADC ART Spark Tank, Jul 28, 2026) is the digital-twin startup worth watching, covered in Technology on WillCo's Radar above. The competitive read: its attempt to unify wellbore simulation across integrity testing, drilling, casing, and cementing in a single transient model is harder than anything established vendors offer in integrated form. Early stage, no field validation - but the architecture ambition is a different order from incremental feature additions to existing platforms.

👀 What We're Watching Next

  • Whether Helmerich and Payne or ExxonMobil publish well-cost-per-foot data comparing automated versus conventional rigs in the Permian, which would give the industry its first operator-scale economic benchmark for robotic drilling. Watch equally for connection-time distribution data, not averages: that is the figure that would show whether the automation is delivering consistency or only speed.

  • Fervo Energy's Phase II cost trajectory toward the $3-million-per-MW long-term target, and whether the drilling-time reduction curve continues compounding as the program moves to deeper, higher-temperature targets beyond Sawtooth 7.

  • Independent field-validation data for the drillers.ai transient wellbore digital twin - specifically a documented comparison between twin predictions and actual wellbore measurements across multiple hole sections, which would be the signal that physics-AI unified wellbore simulation is ready for serious operator evaluation.

🗄️ From the WillCo Desk: The Data Layer Underneath the Automation

This edition kept returning to one question: not whether the automation works, but whether anyone can verify what it is actually doing. That question does not start on the rig floor. It starts in the data the automation is standing on. Three recent WillCo pieces work that layer directly, and each one lines up with a thread in this edition.

  • The BHA Static-Data Timing Gap: Why Your Real-Time Models Are Running Blind (Aug 24, 2026 - most recent WillCo newsletter edition.)


    Real-time models are fed by static bottom-hole assembly data that often arrives after the decisions it was meant to inform. An automated system inherits that lag without announcing it. If you are evaluating a vendor on autonomy, this is the failure mode that does not show up in the demonstration.

  • Reaming Is Not Washing: Getting Borehole-Enlargement Data Right (Aug 20, 2026.)


    Washing, reaming, and hole enlargement look alike in surface rig data, and only the assembly record separates them. Automation that mislabels the operation does not fail loudly; it produces a confident, clean, wrong record. Directly relevant to the consistency argument in this edition's Top Story: a tight connection-time band means nothing if the states being timed are mislabeled.

  • Beyond the Marketing Hype: A Pragmatic Maturity Model for Automated Drilling Reports (Aug 4, 2026.)


    A maturity model for automated morning and daily reporting, built around the same distinction the ExxonMobil story leaves open: what is genuinely automated, and what still needs a human signature before anyone acts on it. If you found the supervised-versus-unattended question useful above, this is that question worked through end to end on the reporting side.

The through-line across all three: automation is only as trustworthy as the record it writes. Get the data layer wrong and every downstream number, including the ones in this edition, is measuring the wrong thing confidently.

📚 Sources and References

Every figure quoted in this edition traces to one of the sources below. Items marked vendor-reported come from the supplier's own release or case study and have not been independently verified in the field. Where a source publishes no number, this edition says so rather than supplying one.

  1. Reuters, Sheila Dang, "Exxon turns to automated drilling in the Permian in push for higher oil output," Aug 24, 2026. Reuters blocks direct archival capture; the syndicated copy carried by WTVB on the same date was used as the verbatim proof, cross-checked against ten further syndications.

  2. World Oil, "SLB launches ExaCT platform for electrically controlled well interventions," Aug 24, 2026. All ExaCT performance figures are vendor-reported and come from a single six-lateral well, not a fleet average.

  3. Fervo Energy / GlobeNewswire, "Fervo Energy Learning Curve Continues on 3rd Generation Well Design, Boosting Drilling Rates by 143% Since Its First Cape Station Well," Jul 8, 2026. Primary source for the Sawtooth 7 figures used in this edition: 19,448 ft measured depth, 7,500 ft lateral, 460 degrees Fahrenheit resource, 21 days spud to total depth. Company-reported, not independently verified.

  4. Fervo Energy / GlobeNewswire, "Fervo Energy Reports Second Quarter 2026 Results," Aug 12, 2026. The Sawtooth 7 well geometry and 21-day spud-to-total-depth figure were first announced Jul 8, 2026 and are carried here as a Q2 milestone restated in the Aug 12 results, not as a development inside this edition's week.

  5. Drilling Contractor, "Digital technologies to be key enabler for Pertamina to grow production, meet Indonesia's energy needs," Aug 20, 2026 (SPE/IADC Asia Pacific Drilling Technology Conference, Bali).

  6. Drilling Contractor, "XRF-FI, WellSoft link fluid data to formation-damage modeling," Aug 21, 2026. The source names the measurement inputs and the simulator link but states no computational method; any AI or machine-learning characterization of this workflow should be treated as unconfirmed.

  7. IPT Global, "How SureTec Equipment Health Monitoring Provided Early Detection of MPD Annular Wear" - the publisher carries no date on this page; Aug 19, 2026 is the date WillCo's weekly sweep picked it up, not a publication date. Vendor case study; the lead-time claim is qualitative and carries no published figure.

  8. SPE Journal, paper SPE 217754, "Taxonomy Describing Levels of Autonomous Drilling Systems Incorporates Complexity, Uncertainty, and Sparse Data With Human Interaction," summarized in the Journal of Petroleum Technology, Jul 29, 2026. Authors: J.P. de Wardt (de Wardt and Co.); E. Cayeux and R. Mihai (NORCE); J. Macpherson (Baker Hughes); P. Annaiyappa (independent consultant); D. Pirovolou (Weatherford). The framework is a conceptual assessment tool and publishes no performance percentages.

  9. Drilling Contractor, "Physics-AI drilling digital twin among new tech featured at ART Spark Tank," Aug 14, 2026 (event held Jul 28, 2026). Carried as a continuing development from Edition #13; no performance figures disclosed.

  10. Drilling Contractor, "New Canrig Titan wrench bolsters tubular automation capabilities," Aug 14, 2026 (launch event Aug 5, 2026). Carried as a continuing development from Edition #13; no operational results published.

  11. Oilfield Technology, Emilie Grant, "The industrialisation of engineering intelligence," Aug 17, 2026. Vendor thought-leadership; no figures.

  12. WillCo Drilling Consulting analysis and cross-references: the three WillCo articles cited in "From the WillCo Desk" are linked inline in that section. Where this edition states a conclusion that no source publishes, including the proposed connection-time consistency test, it is labeled WillCo analysis in the text and is a benchmark to demand of a vendor, not a figure to cite.

🔤 Glossary of Acronyms


📧 Subscribe to WDI for the automation and well-cost benchmarks your competitors are already reading, every Wednesday.

William B. Contreras | WillCo Drilling Consulting | willcodrilling.com | LinkedIn: WillCo Drilling Consulting

About this report: The WillCo Digital Drilling Intelligence Report is a weekly synthesis of verified developments in digital drilling and well construction, published by WillCo Drilling Consulting. Analysis, forecasts, and recommendations reflect WillCo's independent engineering perspective.

📩 info@willcodrilling.com | willcodrilling.com/wdi

Comments


bottom of page